Chapter 47. Fuel-Oil Heating  


§ 47-1. Definitions.
§ 47-2. Permit required.
§ 47-3. Application forms for pets.
§ 47-4. Permits issued only for safe systems.
§ 47-5. Installation of system.
§ 47-6. Restrictions for excess amounts of fuel oil.
§ 47-7. Tanks; composition and gauge.
§ 47-8. Tank locations.
§ 47-9. Underground tanks.
§ 47-10. Tanks located inside buildings.
§ 47-11. Enclosing tanks.
§ 47-12. Maximum storage.
§ 47-13. Filler and vent pipes for fuel-oil tanks.
§ 47-14. Distance of fuel-oil tank from open fire or flame.
§ 47-15. Auxiliary supply tanks; capacity.
§ 47-16. Filling auxiliary tanks; overflow pipe; valves or obstructions.
§ 47-17. Oil pumps used in filling auxiliary tanks; automatic pumps.
§ 47-18. Pipe material; separation from electric wires.
§ 47-19. Supply-pipe diameter.
§ 47-20. Reinforced pipe connections; allowances.
§ 47-21. Openings for pipes through masonry walls below ground level.
§ 47-22. Connections and unions.
§ 47-23. Piping shall be ran as directly as possible.
§ 47-24. Amount of working pressure for systems under pressure.
§ 47-25. Accessible valves.
§ 47-26. Control valves.
§ 47-27. Remote control of flow of oil to the burner.
§ 47-28. Procedure when gas pilot light is extinguished.
§ 47-29. Use of acetylene.
§ 47-30. Type of pipe; brass union required; material on pipe joints; cutoff in steam installations.
§ 47-31. Installation of fuel-oil heating apparatus.
§ 47-32. Copy of rules and regulations furnished with each installation.
§ 47-33. Manufacturer's rules and permit shall be posted.
HISTORY: Adopted City of Norwalk Common Council 5-14-1957; effective 5-25-1957.